ReadyMadeRC
BOSCAM TS351+RC805 5.8G 200MW FPV KIT
| Transmitter frequency | 5645-5945MHz;8CH |
| Transmitting Power | 200mW/23dBm |
| Transmitting distance | >2000m(open area) |
| Frequency control | built-in frequency and phase lock loop |
| AV input | analog AV signal input |
| ANT connector | SMA(inside the needle) |
| Power supply | 6.5-12 volts |
| Current supply | 200mA |
| Size | 55*26*17mm |
| Net weight | 43g |
| Gross weight | 52g |
| Receiving frequency | 5645-5945MHz;8CH |
| Receiving sensitivity | -90dBm |
| Frequency control | built-in frequency and phase lock loop |
| Double lines AV output | analog AV signal output |
| Antenna connector | SMA(Inside the needle) |
| Power supply voltage | 5-12V |
| Supply current | 150mA |
| Dimension | 75*54*15mm |
| Gross weight | 130g |
Notes: These use reverse polarity, RP-SMA connectors and may require an adapter with the use of some antennas. Normally RP-SMA Female to SMA Female., Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
TS351 5.8G 200mW AV wireless transmitter RC805 New version 5.8G ...ReadyMadeRC
M.I.G. TRACKER V4 (MAGNETIC, INERTIAL, GYRO)
| Power supply range | 2s-3s LiPo |
ReadyMadeRC
DJI BLUETOOTH ADAPTER FOR NAZA
| Working Temperature | -10℃~+50℃ |
| Communication Distance | 50m |
| Weight | 17g |
| Power Consumption | 240mw(0.04A@6V) |
Notices:,
BTU Module The Naza-M now provides assistant software for iPhone4s, ...ReadyMadeRC
BATTLESWITCH RADIO CONTROLLED 10A RELAY
| Max relay voltage | 240VAC |
| Max relay current | 10A @ 28VDC, 12A @ 120VAC, 10A @ 240VAC. |
| Relay resistance | 100 mΩ max |
Weight:, 21g / 0.72oz, Specifications:, Diagrams:, , Dimensions:, 1.25" x 1.25" x 0.9", Applications:, Control of powerful auxiliary weapons in RC combat.,
Product Description BattleSwitch is the larger, 10A version of our ...ReadyMadeRC
DOUBLESWITCH RADIO CONTROLLED DUAL 8A RELAY
| Max relay voltage | 240VAC |
| Max relay current | 8A @ 12VDC, 8A @ 240VAC. |
| Relay resistance | 100 mΩ max |
Weight:, 23g / 0.8oz, Specifications:, Diagrams:, , Dimensions:, 1.65" x 1" x 0.72", Applications:, Control of powerful auxiliary weapons in RC combat.,
Product Description DoubleSwitch is a doubled version of our popular ...ReadyMadeRC
5V 1A SWITCHING VOLTAGE REGULATOR
Weight:, 3.8g, Model:, DE-SW050, Performance:, Up to 30V input range, Applications:, Battery powered applications,
Product Description The DE-SW0XX family of switch mode voltage regulators ...ReadyMadeRC
25W STEP DOWN ADJUSTABLE SWITCHING REGULATOR
Weight:, 10g, Model:, DE-SWADJ3, Performance:, Adjustable from 3 to 13V output using screw, Applications:, Battery powered applications,
Product Description The DE-SWADJ 3 is a larger version of ...ReadyMadeRC
10W STEP DOWN ADJUSTABLE SWITCHING REGULATOR
| Input voltage range | 3-30V |
Weight:, 5.5g, Model:, DE-SWADJ, Performance:, , Applications:, Battery powered applications,
Product Description The DE-SWADJ is the adjustable version of our ...ReadyMadeRC
DJI S800 EVO REPLACEMENT ARM, CCW ROTATION
| Total weight | 139.5 g; |
| Working temperature | – 20-70°C; |
| Signal wire standard | 22 AWG SR Wires; |
| Power cord standard | 16 AWG SR Wires; |
S800 EVO Frame Arm description:, The arm has a new, strengthened structure design with greatly enhanced rigidity. Multistrand SR Wires of power and signal lines are embedded which has improved the system reliability comprehensively. The S800 ESC and motors can be installed directly onto the arm., Specification:, , Features:,
Compatible with S800; Greatly enhanced rigidity; Multistrand SR Wires of ...ReadyMadeRC
DJI S800 EVO REPLACEMENT ARM, CW ROTATION
| Total weight | 139.5 g; |
| Working temperature | – 20-70°C; |
| Signal wire standard | 22 AWG SR Wires; |
| Power cord standard | 16 AWG SR Wires; |
S800 EVO Frame Arm description:, The arm has a new, strengthened structure design with greatly enhanced rigidity. Multistrand SR Wires of power and signal lines are embedded which has improved the system reliability comprehensively. The S800 ESC and motors can be installed directly onto the arm., Specification:, , Features:,
Compatible with S800; Greatly enhanced rigidity; Multistrand SR Wires of ...ReadyMadeRC
DJI NAZA-M V2 W/GPS COMBO WITH IOSD MINI, AND BTU
| Working Temperature | -10℃~+50℃ |
| Communication Distance | 50m |
| Weight | 17g |
| Power Consumption | 240mw(0.04A@6V) |
| Working Temperature | -20℃~+60℃ |
| Video Input/Output Mode | PAL/NTSC(automatically recognize) |
| Weight | 14g |
| Working Current (Typical Value) | 180mA@6V |
Voltage: 6V, Notices:,
BTU Module The Naza-M now provides assistant software for iPhone4s, ...ReadyMadeRC
FAT SHARK PREDATOR V2 CE VIDEO GLASSES W/TRANSMITTER AND CAMERA
| FOV (field of view) | 25 degrees diagonal |
| Interpupillary (IPD) distance | 63.5mm (fixed) |
| Optional diopter lens inserts | -2, -4, -6 dpt Image size |
| User Controls | Channel selection |
| Power supply | 7 - 13 V (2S/3S supply) |
| Power consumption (@7.4V nominal) | 300mA wireless mode |
| Weight | 150g |
| Note | Fat Shark headsets use Airwave brand RF modules. |
Includes:, Predator VGA headset with integrated 5G8 receiver (no head tracking)., Goggles Optics:, Audio:, Stereo (optional headphones available, Electrical:, Antennae:, External (dipole included or circular polarized compatible), Mechanical:, Ergonomic molded headset, Interface:, 3.5mm AV in/out port, Operating Frequencies:, 5.8 Ghz Receiver Module, *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
FatShark quality on a budget! Backed by the quick shipping ...ReadyMadeRC
FAT SHARK ATTITUDESD V2 VGA VIDEO GLASSES
| Note | Battery, charger and adjustable earphones are sold separately. |
| Option 1 | The |
| Option 2 | If you want to share the power supply with your ground station, the |
| Option 3 | Any 2s-3s lipo with a 2.1mm barrell connector like |
| Interpupillary (IPD) distance | 59-69mm (adjustable) |
| Power input | 7-13V (2s/3s supply) |
| Power Consumption @7.4VDC | 200/350mA (direct/wireless) |
| Weight | 150g |
| Power Supply | 7-13V (2s-3s supply) |
| Power consumption | 310mA@7.4VDC |
| Transmitting Power | 250mW |
| Ch1 | 5740, CH2 |
| Weight | 22g with antenna |
Kit includes:, - AtttitudeV2 headset (with integrated 5G8 RX and Trinity HT), Mechanical:, 55x26x11mm, *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
AttitudeSD FPV goggles (VGA, 640X480) with NexwaveRF 5G8 receiver, Trinity ...ReadyMadeRC
ALTITUDERC NANO 5.8G FPV TRANSMITTER
| Dimensions (w/o antenna and cables) | Width |
| Length | 0.80in |
| Height | 0.26in |
| Weight | 3 gr |
| Input voltage range | 3.4v - 12.6v (1s - 3s lipo) |
| Camera output voltage | 3.6v |
| Output power | 13-14dBm (25mW) |
| Power connector | JST female |
| Camera connector | JST ZH on the transmitter, loose end wire to camera. |
| Frequencies | Switch # |
ReadyMadeRC
TAROT 2 AXIS CAMERA GIMBAL FOR GOPRO HERO3, 3+ W/FREE CABLE
| 7. Supported receiver type | conventional/S-BUS/DSM2/DSMJ/DSMX receiver. |
| 8. Supported RC | PPM/PCM/2.4G. |
| 9. Operating supply | DC 7.4V~14.8V (Li-Po 3S is recommended) |
| 10. Operating current | 200mA-500mA (Depending on power supply voltage and motor power) |
| 11. Operating temperature | -15ºC~65ºC. |
| 12. CPU | Double 32bit ARM |
| 13. Sensor technology | 3-axis MEMS gyro and accelerometer. |
| 14. Max angular rate | 2000 º /sec. |
| 15. Max acceleration | 16g. |
| 16. Control frequency | 2000Hz |
| 17. Motor driver frequency | 20KHz (quiet and smooth) |
| 18. Control accuracy | 0.1° |
| 19. Control range | -45º~45º(roll), -135 º~90 º(tilt). |
| 20. Attitude arithmetic | BLDC gimbal dedicated brushless motor decoupled EKF algorithm. |
| 21. Aerial photography equipment | GOPRO Hero3. |
Note:, Modifications may be required to use HERO4, Parts included for the kit: 2 motors mounted onto the swing arms, gimbal controller board, mounting bracket with GoPro brace, 2 male to male servo cables (one with Y end), USB firmware updater connector and cable, 4 rubber dampeners and mounting bracket + hardware for the gimbal.,
FREE LIVE VIDEO OUT CABLE OPTION...YES, OUR CABLES WILL WORK ...